To connect Jooki to a wired headset, please get a “passive” (i.e. without built-in DAC) USB-C to 3.5mm jack Audio Adapter. 

We tested these models:

https://www.amazon.com/dp/B09QC5477Y

https://www.amazon.com/dp/B07CCN894F?psc=1&ref=ppx_pop_dt_b_product_details

https://www.onlinekabelshop.nl/usb-c-naar-3-5mm-jack-audio-adapter-met-extra-usb-c-aansluiting-0-15-meter

Once you find the right model, please follow the steps below:

Step 1: power Jooki on.

Step 2: open the Jooki app and tap on the prompt to update your Jooki’s firmware: this will take around 10 minutes. You can take your phone away while this is happening.

Step 3: when the firmware has updated, open the app and go to Settings > Wireless headsets. 

Step 4: enable the “pairing mode” on your headset: its name will appear in the Jooki app.

Step 5: tap on the name of the headset and it will connect with Jooki.

To disconnect: turn the headset or Jooki off.

From now on if Jooki is on, the headset will connect automatically when powered on.

If possible, dedicate a headset to your child’s listening to Jooki.